..
min read

Table Of Contents

Bathroom renovation done right

DIY bathroom renovations will not be successful without a well-thought-out remodelling plan. A remodel can change the whole look and feel of your bathroom, while certain additions can make your space more functional.

Regardless of what you decide to do, it is essential to plan ahead before starting any renovation project. This article will help you plan and understand the process to follow to renovate your bathroom yourself. Let’s dive right into the steps involved!

Starting your renovation

Step one: Planning your bathroom renovation

Planning a bathroom renovation project is not an easy task. There are many factors to consider and room for error. Planning your bathroom project beforehand can save you time and energy. By understanding the elements that influence the cost, service, and layout of your bathroom, you can make more informed decisions on what features to include.

Here are a few things to consider when doing planning for a bathroom remodel:

  • Know the location of plumbing lines and electrical wiring to avoid damaging the hookups and ending up with a costly repair.
  • Where will you be storing your towels and toiletries? Consider having shelves and cabinets to increase the storage space in your bathroom.
  • Are you going for new fixtures? Replacing some fixtures will have an impact on the cost of renovating.
  • What colours do you like? Ensure that your colour choices do not clash with the floor and tiles.

After planning and designing your bathroom, you need to find the tools to use for renovation. They include:

  • Safety mask
  • Chisel
  • Adjustable wrench
  • Flathead screwdriver
  • Hacksaw
  • Tape measure
  • Spackle knife
  • Utility knife
  • Chalk line
  • Gloves
  • Goggles
  • Spackle
  • Stud finder
  • Caulking gun
  • Silicone sealant
  • Power drill
  • Pry bar
  • Extension cord
  • Bucket
  • Hammer

Step two: Preparing your bathroom for remodel

By now, you already have a plan and design for your bathroom makeover. If you’re doing a comprehensive bathroom remodel, you should start by removing fixtures and fittings that will be replaced during the renovation process. This will allow you to start remaking your bathroom all over again.

Furthermore, removing such fixtures will free up space in the bathroom for cleaning, repairing, and installing new fixtures and materials. To avoid any unnecessary water spills, plumbing problems, and damage of materials, follow the procedure below:

  • Start by shutting off the water supply and draining the toilets.
  • Next, remove the tiles below the bathtub to enable you to unscrew the bathtub. After that, remove the bathtub.
  • Finally, start removing vanities, cabinets, mirrors, wall tiles and finish with floor tiles if you’re planning to replace them.

Bathroom remodelling tip: If you have a shower screen, you may consider removing it first or before embarking on removing the tiles and bathtub.

Step three: Plumbing and electrical rough-in

With everything out of the way, it’s time to start fixing everything plumbing and electrical in place. Whether you’re reusing the items or repairing new ones, it’s ideal to begin with fixing the bathtub, shower, and sink. This is because they dictate the amount of space and hence will enable you to carry out the bathroom remodelling process easily. Make sure you pick a bathtub or shower that fits your bathroom design.

Next, you need to adjust the electrical wiring in your bathroom. This can either be socket relocation, increasing the number of sockets, or even changing the position of the bathroom lights.

It’s advisable to hire a plumber and electrician to carry out these tasks to avoid accidents and damages.

Bathroom remodelling tip: Before installing your bathtub or shower, inspect the floor to ascertain if it needs replacing. This will help you prevent any possible damage in the future.

Step four: Install floor tiles

Next, it’s time to work on your floor. Tiles are the most common for bathroom floors; however, alternatives to consider, such as vinyl or laminate, are cheap and easier to use in your DIY bathroom remodel.

If your preferred choice is a tile floor, make sure to utilise the chalk line to create reference lines. This will help you avoid having uneven floors. In addition, remember to grout the spaces between the tiles.

Step five: Place new drywall and paint

Now that the floor is finished, it’s time to hang your new wall. To have an even surface you work with, make sure to cover all crevices and spaces with gypsum paste and tape before installing.

Also, choose moisture-resistant paint when painting your bathroom. This will aid in the prevention of mould and mildew growth. If your walls are in good shape, you can skip this step.

Step six: Fix new cabinets and vanities

Now that all of the necessary painting and wall work has been completed, it’s time to move on to the next step: replacing old cabinets and vanities. If you didn’t fix the sink in the previous stage, now is the time to do so. To avoid water backlash, make sure the walls near the sink are tiled.

Begin by putting together the vanity. This will make installing the sink and faucet a lot easier. Cabinets, mirrors, and other decorative things can be added later.

Step seven: Installing the toilet and other accessories

At this stage, your bathroom should resemble a completed one. However, some fittings have not been fixed; the toilet and other accessories such as toilet bar, toilet paper holder, door hook, towel ring, among others. This is now the time to install a new showerhead.

To install a toilet, make sure you’ve used a new wax seal to prevent leakages. Make sure you’ve connected all the plumbing connections that were disconnected in step three.

Step eight: Install the shower screen

One major thing is remaining, your shower screen or bathroom door. If you don’t understand how to repair it, you can call a professional DIY designer to take care of it.

Step nine: Finalising your DIY bathroom renovation

Your bathroom is now complete and ready to use. The next step is to decorate your bathroom. Putting trim around mirrors, changing decorative elements such as plants and portraits, and installing curtains if your bathroom has a window are all good places to start.

This step will ensure that your newly-refurbished bathroom looks its best. Your bathroom renovation will be complete once this is done.

DIY or professional bathroom renovation?

Renovating your bathroom takes a lot of effort and time, especially if you’re doing a complete makeover. If you’re not sure if you’ll be able to complete the project on your own, it’s a good idea to hire a professional. Furthermore, you should also consider the warranty of some of the items bought.

Some companies do not accept warranties unless their products are installed by a professional. A professional bathroom designer can complete the task more quickly and to a higher standard. So, why not reach out to the experts for a stress-free remodelling experience.

Get a free estimate

Max file size 10MB.
Uploading...
fileuploaded.jpg
Upload failed. Max size for files is 10 MB.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Ready to Elev8 your bathroom?

Contact us today to get started!